實生苗接穗、黑高峰和永樹冠楊梅村苗、枝條、芽苗、福建和浙江和湖南、廣西、貴州、云南砧木批發與加工、嫁接工具、老樹嫁接、本地小楊梅、砧木、種子、種苗、嫁接工人出租、各品種的楊梅嫁接技術員的租賃服務、 楊梅種子100萬粒（13507五40047預定電話Tel珠、顆）2023-24-YCK001各品種的楊梅樹的砧木和接穗的品種有：黑高峰、大黑炭、烏酥核、晚薺、丁香、東魁、安海王子、水靈、烏梅、楊梅種子各品種都有，正貨、臺梅、小大葉細蒂、早熟楊梅種子、晚熟、黑魁、冰糖心、晚熟晚稻、恒春1年楊梅小杯苗、永樹冠種子種苗、臨海、黃巖等楊梅苗、白水晶、仙居、嫁接接穗等。一般搞這個東西比較麻煩，一定要有充足的時間，加工，如很急的一般搞不了，下單說要說好數量，規格，我們嚴格按你說的要求加工，同時有大量高質量的楊梅種子、種苗、成年樹出售，所有種苗和種子都支持出口。
各品種楊梅接穗、砧木、永樹冠楊梅樹枝頭、楊梅栽植技術園地整理楊梅栽培園地多為低山丘陵，地勢平緩，雜灌低矮,直接挖穴整地,按照80cmx80cmx80cm規格挖穴，栽植株行矩為4mx5m;栽植前1至2個月進行，每栽植穴內施農家肥50kg或3~4kg餅肥+過磷酸鈣1kg,施肥后上覆15~20cm厚的肥沃表土，既能防肥料流失,又可避免肥料直接與苗株根系接觸。新式早熟楊梅苗 浮宮每年2-3月份成熟水晶種植的區別-扁山楊梅幼齡楊梅樹要求在1m左右直徑范圍內，連根清除雜草、雜樹，并實行土壤覆蓋，一年內約中耕3次。成年楊梅園可以實施清耕，一般一年中耕2次，為先次在2月底至3月底進行，中耕深度20cm左右，第二次果實采收后結合施追肥及時進行，一般在7月中旬前完成，中耕深度約15cm。2.1.2深翻全園深翻在楊梅苗定植4～5年后每隔2年進行一次，方法是沿定植穴逐年向外深翻，使楊梅園土壤疏松通氣，利于根系向外伸展。
挖好長、寬各1m，深80cm的栽植穴。栽植前15d左右施底肥，穴施堆肥40～50kg或餅肥4～5kg加過磷酸鈣1kg，與土壤混合施入，回填土壤至接近穴口，使中間高、四周低呈饅頭狀，并踏實。栽植時，將苗木植于定植穴中間，苗木豎直，根系舒展，逐漸加入表土，稍稍搖動樹苗，繼續培土，使根頸部高出土面10cm左右反季節廣西楊梅苗品種 福建早熟楊梅苗2-3月晚熟7-8月，踏實，澆足水，較后用土培至接近苗木頂端，以利于苗木成活。苗木定植后，當年7至8月份高溫季,要及時進行松土保墑，維持土壤呈疏松狀態。楊梅是雌雄異株果樹，栽植時需配植一定的雄株作授粉樹,雌雄株配比為100：1，雄株較好根據花期風向栽在上風口。
培土山地楊梅園由于土壤經常被沖刷，根系易暴露于土外，宜每隔2年培土一次，培土時間在冬季進行，可以就地取材，采用山地表土、草木灰、河泥、塘泥等。方法是把客土均勻加于樹盤，一般每次加高5cm左右，這樣可以增厚楊梅園的耕作層，保護根系，增加根系的伸展范圍BS黑高峰水晶荸薺早熟楊梅每年3月份成熟 晚熟楊梅8月份熟透，提高根系的吸收能力，增強防寒抗旱能力，從而使楊梅獲得高產。2.3.3楊梅幼株樹形培養楊梅幼株一般培養“一干三主枝”的自然開心形樹冠。定植后,在主干離地面30~40cm處短截。為先年以抹芽為主，從離地面約20cm起，選留為先主枝，以后每隔15~20cm選留第二、第三主枝。
Seedling scions, Yangmei grafting tools, old tree grafting, local small Yangmei, rootstocks, rental of grafting workers, rental services for various varieties of Yangmei grafting technicians, and 1 million Yangmei seeds (13507五40047 reservation phone number Tel Zhu, pieces) 2023-24-YCK001. The rootstocks and scions of various varieties of Yangmei trees include: black peak, big black charcoal, black crisp kernel, evening shepherd's purse, clove, Dongkui, Anhai Prince, Shuiling, black plum, Yangmei seeds Tai Mei, Xiao Da Ye Xi Di, Early Maturity, Late Maturity, Black Kui, Rock Sugar Heart, Late Maturity Late Rice, Hengchun, Yongguan, Linhai, Huangyan and other Yangmei seedlings, White Crystal, Xianju, Grafting scions, etc. Generally, it is quite troublesome to produce this product. It is necessary to have sufficient time for processing. If it is urgent, it is generally not possible to do so. When placing an order, it is necessary to specify the quantity and specifications. We strictly follow your requirements for processing, and at the same time, we have a large number of high-quality bayberry seeds, seedlings, and adult trees for sale.
Yangmei planting technology garden land arrangement. Yangmei cultivation gardens are mostly low mountains and hills, with flat terrain and low miscellaneous irrigation. Directly dig holes and prepare the land according to the 80cmx80cmx80cm specification, with a planting plant row angle of 4mx5m; 1 to 2 months before planting, apply 50kg of farmhouse fertilizer or 3-4 kg of cake fertilizer+1kg of superphosphate in each planting hole. After fertilization, cover with 15-20cm thick fertile topsoil to prevent fertilizer loss and avoid direct contact with the seedling root system. Young bayberry trees are required to have a diameter range of about 1m, remove weeds and miscellaneous trees by connecting roots, and implement soil cover. They should be cultivated approximately three times a year. Adult bayberry orchards can be cleared for cultivation, usually twice a year. The first time is from the end of February to the end of March, with a depth of about 20cm. After the second fruit harvest, it is combined with topdressing in a timely manner, usually completed before mid July, with a depth of about 15cm. 2.1.2 Deep plowing of the entire orchard: Deep plowing is carried out every 2 years after 4-5 years of fixed planting of Yangmei seedlings. The method is to deeply plow outward along the fixed planting hole year by year to loosen and ventilate the soil in the Yangmei orchard, which is conducive to the outward extension of the root system.
Dig planting holes with a length of 1m, a width of 1m, and a depth of 80cm. About 15 days before planting, apply base fertilizer, 40~50kg of compost or 4~5kg of cake fertilizer plus 1kg of superphosphate in the hole, mix with the soil, backfill the soil close to the hole mouth, make the middle high and the surrounding low in the shape of Mantou, and be firm. When planting, plant the seedlings in the middle of the planting hole, with the seedlings vertical and the roots spreading. Gradually add topsoil, shake the seedlings slightly, and continue to soil until the root neck is about 10cm higher than the soil surface. Step on it, pour enough water, and finally use soil to cultivate it close to the top of the seedlings to facilitate their survival. After planting seedlings, during the hot season from July to August of that year, timely soil loosening and moisture preservation should be carried out to maintain a loose soil state. Yangmei is a dioecious fruit tree. When planting, it is necessary to plant a certain number of male plants as pollinating trees, with a ratio of 100:1 between male and female plants. It is best to plant male plants in the upper air according to the flowering period and wind direction.
Due to the frequent erosion of the soil, the roots of the Yangmei orchard in mountainous areas are easily exposed to the soil. Therefore, it is advisable to cultivate the soil every 2 years. The cultivation time is in winter, and local materials can be used, such as mountain topsoil, plant ash, river mud, and pond mud. The method is to evenly add the guest soil to the tree tray, usually increasing it by about 5cm each time. This can thicken the cultivation layer of the bayberry orchard, protect the root system, increase the extension range of the root system, improve the absorption capacity of the root system, enhance cold and drought resistance, and thus achieve high yield of the bayberry. 2.3.3 Cultivation of Young Yangmei Trees: Young Yangmei trees generally cultivate a natural open center shaped crown with "one stem and three main branches". After planting, cut the trunk 30~40cm above the ground. In the first year, the main method is to apply buds. Starting from about 20cm above the ground, the first main branch is selected, and the second and third main branches are selected every 15-20cm thereafter.
